Copy Mode Settings
291
System Settings
11
Output Destination
Set the default value of the output destination for printing or copying.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Only when an Exit 2 Tray is installed in a machine without a finisher (optional), [Center Tray
- Upper] can be selected. In this case, [Center Output Tray] is indicated as [Center Tray -
Lower].
Stamp Position
Set the default value for [Position] displayed when [On] is selected for [Stamp] of
[Annotation] in the [Output Format] screen.
Stamp Size
Set the default value for [Size] displayed when [On] is selected for [Stamp] of
[Annotation] in the [Output Format] screen.
Date Position
Set the default value for [Position] displayed when [On] is selected for [Date] of
[Annotation] in the [Output Format] screen.
Page Number - Style
Set the default value for [Style] displayed when [On] is selected for [Page Number] of
[Annotation] in the [Output Format] screen.
Page Number - Position
Set the default value for [Position] displayed when [On] is selected for [Page Number]
of [Annotation] in the [Output Format] screen.
Sample Set
Set the default value for [Sample Set] in the [Job Assembly] screen.
Copy Control
These settings relate to copy operation control.
1 Select [Copy Control].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to return to the
previous screen or [ ] to move to the next screen.
3 Select the setting value.
4 Select [Save].
To Next Page
Loading...
