11 System Settings
290
System Settings
11
Auto Exposure
Set the default value for [Auto Exposure] in the [Image Quality] screen.
[Auto Exposure] is valid when [Original Type] is set to [Text & Photo], [Text], or [Light
Text].
2 Sided Copying
Set the default value for [2 Sided Copying] in the [Basic Copying] screen.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Scan Options] screen.
Edge Erase - Top & Bottom Edges
Set the default value for the amount of edges erased from the original in the top and
bottom directions in [Edge Erase] in the [Scan Options] screen. You can specify the
value within the range from 0 to 50 mm in 1 mm increments.
Edge Erase - Left & Right Edges
Set the default value for the amount of edges erased from the original in the left and
right directions in [Edge Erase] in the [Scan Options] screen. You can specify the value
within the range from 0 to 50 mm in 1 mm increments.
Center Erase/Binding Erase
Set the default value for the binding erase amount of the original in [Edge Erase] in the
[Scan Options] screen. You can specify the value within the range from 0 to 50 mm in
1 mm increments.
Image Shift - Side 1
Set the default value for [Side 1] of [Image Shift] in the [Scan Options] screen.
Image Shift - Side 2
Set the default value for [Side 2] of [Image Shift] in the [Scan Options] screen.
Image Rotation
Set the default value for [Image Rotation] in the [Scan Options] screen.
Image Rotation Direction
Set the default value for [Image Rotation - Rotation Direction], If documents are of
mixed orientations.
Original Orientation
Set the default value for [Original Orientation] in the [Scan Options] screen.
Copy Output
Set the default value for [Finishing] in the [Output Format] screen.
Note • If no option is installed in the machine, even when [Collated] is selected, the machine
operates as [Uncollated].
To Next Page
Loading...
