5 Scan
178
Scan
5
Basic Scanning
The [Basic Scan] screen displayed for [E-mail], [Scan to Mailbox], [Network Scanning],
and [Scan to FTP/SMB] allows you to set basic features. The following shows the
reference section for each feature.
Lighten/Darken (Adjusting the Scan Density)..........................................................................178
2 Sided Originals (Scanning Both Sides of a Document).........................................................178
Original Type (Selecting the Document Type).........................................................................180
File Format (Selecting the Format of Scanned Data) ...............................................................180
Note • When selecting [Scan to Mailbox], [File Format] is disabled.
1 On the [All Services] screen, select
[E-mail], [Scan to Mailbox],
[Network Scanning], or [Scan to
FTP/SMB].
2 Select the [Basic Scan] tab, and
select a feature on the screen.
Lighten/Darken (Adjusting the Scan Density)
You can select the scan density from seven levels. Moving to the upper position
makes the scan density lower, and moving to the lower position makes the density
higher.
1 Use [ ] and [ ] to adjust the
density.
2 Sided Originals (Scanning Both Sides of a Document)
You can automatically scan both sides of a 2-sided document.
By setting the binding style, both sides are scanned in the same orientation.
1 Select any item.
îš„1 Sided
Select this to scan only 1 side of the document.
îš„2 Sided (H to H)
Select this when both sides of the 2-sided document are in the same orientation.
To Next Page
Loading...
Need help?
General
