Login Setup/Auditron Administration
363
System Settings
11
Account ID Characters
If required, you can change the indication that appears as “Account ID” on the [System
Administrator Login] screen when the <Log In/Out> button on the control panel is
pressed to such as “AccountName” or “Number”. The alias can be set to 1 to 15
characters.
Note • This item appears when [Network Access] is selected in "Login Setup/Auditron Mode"
(P.365).
• The value is also reflected in report/list displays, and when accessing from CentreWare
Internet Services.
Hide Account ID
Set the way in which the account ID is shown as it is being input. Use this feature to
strengthen security as required.
Note • This item appears when [Network Access] is selected in "Login Setup/Auditron Mode"
(P.365).
Show
As you enter the account ID, the characters are echoed on the screen in the normal
way.
Hide
As you enter the account ID, the character string is hidden as a row of asterisks (∗∗∗∗∗).
Failed Access Log
In order to detect unauthorized access, if the number of times that authentication fails
within a set time exceeds the [Failed Attempts] value set here, then an error is logged.
1 Select [Failed Access Log].
2 Select [On], and with the numeric
keypad enter the number of
failures.
Store User Details
You can set the destination to save authentication information. Select NVM or hard
disk.
Note • This item appears when [Network Access] is selected in "Login Setup/Auditron Mode"
(P.365).
Charge Print Settings
You can set how received print jobs should be handled.
1 Select [Charge Print Settings].
2 Select the item to be set, and
select [Change Settings].
3 Set the setting value.
4 Select [Save].
To Next Page
Loading...
Need help?
General
