Setup Menu
343
System Settings
11
Send as E-mail
Specify the recipients for the e-mail.
You can specify a total of up to 100 addresses, either selecting from the address book
or by direct input.
Note • If selecting [On] for [Encryption] in the [Detailed Settings] screen, enable this item before
specifying the recipients. You cannot select [On] for [Encryption] after specifying the
recipients.
• If [On] for [Encryption] in the [Detailed Settings] screen has been selected, you cannot
specify a recipient by selecting [New Recipient].
Address Book
The recipients can be specified from address book. The specified address appears in
[Recipient Name/E-mail Address] in the [5. Send as E-mail] screen.
1 Specify addresses.
For more information, refer to "Address
Book" (P.167).
New Recipient
Specify a new address. The specified address appears in [Recipient Name/E-mail
Address] in the [5. Send as E-mail] screen.
1 Select the item you want to change,
and select [Change Settings] to set.
Detailed Settings
Set the subject, output file format, encryption, and digital signature.
1 Select the item you want to change,
and select [Change Settings] to set.
Note • If selecting [On] for
[Encryption], enable this item
before specifying the
recipients. You cannot select
[On] for [Encryption] after
specifying the recipients.
Delete
Deletes all information for the selected addresses.
Change Settings
Confirm or change the selected recipients.
For the method for confirm/change the settings, refer to "Address Book (Address Number)" (P.347).
To Next Page
Loading...
