E-mail/iFax Settings
329
System Settings
11
Other Settings
You can make other settings relating to e-mail transmission.
1 Select [Other Settings].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select [ ] to display the next screen.
3 Select the setting value.
4 Select [Save].
Maximum E-mail Size
Select whether or not to set an upper limit on data size in e-mail transmissions.
îš„Off
No limit on data size.
îš„On
Set the upper limit on data size.
Set a value from 50 to 65535 KB in 1 KB increments.
Note • If the set value is exceeded, the e-mail transmission is aborted.
Maximum Address Entries
Set the maximum number of addresses that can be specified when sending an e-mail.
The number of addresses is the total number in To:/Cc:/Bcc:.
You can set the maximum number of addresses in the range from 1 to 100. If the
maximum number of addresses is exceeded, the e-mail transmission is aborted.
Note • This setting does not apply to the iFax feature.
Incoming E-mail Print Options
When an e-mail sent to the e-mail address of the machine is received, you can select
the print operation.
îš„Attachment
Only prints the attached documents.
îš„Full Headers and Contents
Prints the e-mail headers and body of the e-mail.
When you check a mark to [Print S/MIME Information], S/MIME Information is also
printed.
îš„Basic Headers and Contents
Prints part of e-mail headers (From/To/Subject/Date) and the e-mail body.
When you check a mark to [Auto Print], the machine prints only E-mail that has
contents.
To Next Page
Loading...
Need help?
General
