On-hook/Others
141
Fax
4
Private Polling (DTMF Method)
1 Display the [Basic Features] screen by selecting the [Basic Features] tab.
2 Select [Keyboard] to display the
keyboard on the touch screen.
3 Enter a format corresponding to
Manual Send or Auto Send.
Display the [On-hook/Others]
screen by selecting the [On-hook/
Others] tab.
4 Select [Polling].
5 Select [On].
îš„Off
Private Polling is not used.
îš„On
Private Polling is used.
îš„Format for Auto Send
îš„Format for Manual Send
Note • Use the keyboard on the touch screen to enter symbols such as "!" and "∗". For information
on the input method, refer to "Entering Text" (P.263).
• Enter the password if necessary.
• This method is only available for transmission between machines of this model.
• The above dialing format can be registered in address number to enable private polling
using an address number. For information on how to register address numbers, refer to
"Address Book (Address Number)" (P.347).
Store for Polling
(Allowing Remote Machines to Retrieve Documents from Your Machine)
Storing for polling is to store a document on your machine so as a remote machine can
retrieve it from your machine. There are two methods for Store for Polling: Public
Mailbox and Private Mailbox.
The machine can be set to automatically delete the documents for polling after transmission. For
information on the settings, refer to "Doc for Polling - Auto Delete" (P.315).
To Next Page
Loading...
Need help?
General
