Registering/Deleting/Renaming Stored Programs
215
Stored Programming
8
Entering/Changing Stored Program Name
Below describes the procedure for entering or changing a name of a stored program.
Up to 18 characters are allowed for a stored program's name.
For information on how to enter characters, refer to "Entering Text" (P.263).
1 Select [Enter/Change Name].
2 Select the number to register or
change a name.
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
3 Enter a name, and select [Save].
Assigning/Changing Icons for Stored Programs
Below describes the procedure for assigning or changing an icon of a stored program.
Nine icons are available.
1 Select [Assign/Change Icon].
2 Select the number to assign or
change an icon.
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
3 Select an icon, and select [Save].
îš„No Icon
No icon is assigned to a registered stored program.
îš„Icon
Select an icon according to the content of the registered stored program.
To Next Page
Loading...
Need help?
General
