Scan Options
69
Copy
3
Image Shift (Shifting the Image Copy Position)
Copies can be made with the document image position shifted to the left, right, top, or
bottom of the paper, or with the document center shifted to the center of the paper. You
can also make copies with a margin added to the top, bottom, left, or right. When
making 2-sided prints, you can set the shift positions for both [Side 1] and [Side 2].
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
[Scan Options] screen are the same.
Note • The image shift amount is set in accordance with the paper. Even if you set copies to be
enlarged or reduced in [Reduce/Enlarge], the image shift amount is not affected.
1 Select [Image Shift].
2 Select any item.
îš„No Shift
The position of the document image is not shifted.
îš„Auto Center
The center of the document is shifted to match the center of the paper.
îš„Image Shift/Variable Shift
You can set the margin amount. Set the top and bottom, and left and right values within
the range from 0 to 50 mm in 1mm increments.
z
Side 1
Displays the [Image Shift - Side 1] screen.
Refer to "[Image Shift - Side 1] Screen" (P.69).
z
Side 2
Displays the [Image Shift - Side 2] screen.
Refer to "[Image Shift - Side 2] Screen" (P.70).
îš„Mirror Shift
Select this item when you want the positioning of Side 2 to match the positioning of
Side 1.
[Image Shift - Side 1] Screen
You can set the image shift of Side 1.
1 Select any item.
îš„No Shift
The position of the document image is not shifted.
îš„Auto Center
The center of the document is shifted to match the center of the paper. Set the top and
bottom, and left and right values within the range from 0 to 50 mm in 1mm increments.
To Next Page
Loading...
Need help?
General
