Print Mode Settings
305
System Settings
11
Banner Sheet
Select whether to output banner sheets to separate different outputs.
Note • Even if the stapler feature is enabled, banner sheets are not stapled.
• On a print job from a Macintosh, the document name does not appear on the banner sheet.
• When printing banner sheets, they are counted for metering purposes.
Off
Do not print banner sheets.
Start Sheet
Prints a banner sheet before a print job.
End Sheet
Prints a banner sheet after a print job.
Start Sheet & End Sheet
Prints banner sheets before and after a print job.
Banner Sheet Tray
Set the paper tray used for banner sheets.
Select from [Tray 1] to [Tray 4], and [Tray 6].
PostScript Paper Supply
Select whether the PostScript DMS (Deferred Media Selection) feature is enabled or
not.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
PostScript Font Absence
Set an action when a PostScript font specified in a job is not present.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Cancel Printing
Cancel printing.
Substitute Font and Print
Continues printing, using a substitute font.
PostScript Font Substitution
When a PostScript font specified in a job is not present, set whether to use ATCx for
the substitute font.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
To Next Page
Loading...
