PCL Emulation
559
Appendix
17
PCL Emulation
The following table shows the emulation parameters and their values for PCL
emulation.
For information on how to change parameter values, refer to "Print Mode" (P.387)
Parameter
I
tem
No.
Value
Paper Tray 201 0 (Default): Auto
1: Tray 1
2: Tray 2
3: Tray 3
4: Tray 4
5: Tray 5 (Bypass)
6: Tray 6 (High Capacity)
Selects the paper tray. When [Auto] is selected, the machine automatically
selects the tray that contains the paper whose size is specified on the [Paper
Supply] screen.
Auto Size 202 3: A3
4 (Default*): A4
5: A5
14: B4
15: B5
21: 8.5 × 14”
22: 8.5 × 13”
23 (Default*): 8.5 × 11”
24: 11 × 17”
30: 8K
Sets the default paper size when the machine is set to select the paper size
automatically. Only available when [Paper Tray] is set to [Auto].
* The default value will be either [4] or [23] depending on the region of use.
Bypass Size 203 3: A3
4 (Default*): A4
5: A5
14: B4
15: B5
21: 8.5 × 14”
22: 8.5 × 13”
23 (Default*): 8.5 × 11”
24: 11 × 17”
Sets the paper size for the bypass tray. Only available when [Paper Tray] is
set to [Tray 5 (Bypass)].
* The default value will be either [4] or [23] depending on the region of use.
Orientation 205 0 (Default): Portrait
1: Landscape
Sets the document orientation.
2 Side Print 206 0 (Default): Off
1: On
Sets whether to enable double-sided printing.
To Next Page
Loading...
Need help?
General
