Network Settings
297
System Settings
11
SMTP Server Settings
Set the SMTP server. In [SMTP Server Settings], you can set the following items.
For information on SMTP server settings, refer to the Network Administrator Guide.
Domain Filter
Set accepted domains. In [Domain Filter], you can set the following items.
For information on domain filter, refer to the Network Administrator Guide.
Remote Authentication Server Settings
You can set the remote authentication server. Up to 5 servers can be set.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
1 Select [Remote Authentication
Server Settings].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to return to the previous screen or [ ] to move to the next screen.
3 Set the setting value.
4 Select [Save].
Authentication System
Select the system for authentication from [Kerberos (Windows2000)] and [Kerberos
(Solaris)].
Remote Authentication Server 1 through 5
Make the remote authentication server settings.
Server - Server Setup
Select the remote authentication server specification method from [By IP Address] and
[By Server Name].
Server - IP Address
Set the IP address of the remote authentication server using values from 0 to 255.
Note • You can set a server IP address when [Server -Server Setup] is set to [By IP Address].
• 224.XXX.XXX.XXX to 255.XXX.XXX.XXX and 127.XXX.XXX.XXX cannot be set.
1. SMTP Server Setup 5. E-mail Send Authentication
2. SMTP Server IP Address 6. SMTP AUTH Login Name
3. SMTP Server Name 7. SMTP AUTH Password
4. SMTP Server Port Number
1. Domain Filtering 2 to 51. Domains 1 to 50
To Next Page
Loading...
