Copy Mode Settings
293
System Settings
11
Pseudo-Photo Gradation Mode
Set the toning method for photo originals. To get closer to photo image quality, select
the handling of intermediate tones (gray). You can select from [Error Diffusion] and
[Dither].
Original Type - Lightweight Originals
When [Text] is selected for [Original Type] in the [Image Quality] screen, set whether
to display a special original ([Lightweight Originals]).
Stamp Density
Set the translucency of the stamp printed as annotation.
You can select from 3 translucency values: 0% (solid), 25%, and 50%. The 0%
represents no translucency.
Note • If the stamp with [0%] density is printed over text, the text may no longer be readable.
Stamp Position on Side 2
When an annotation stamp is specified for 2-sided copying, set where to place the
stamp printed on the reverse side.
Opposite to Side 1
Print in a position symmetrically opposite to the front side.
Same as Side 1
Print in the same position as the front side.
Date Position on Side 2
When an annotation date is specified for 2-sided copying, set where to place the date
printed on the reverse side.
Opposite to Side 1
Print in a position symmetrically opposite to the front side.
Same as Side 1
Print in the same position as the front side.
Page Number Position on Side 2
When an annotation page is specified for 2-sided copying, set where to place the page
printed on the reverse side.
Opposite to Side 1
Print in a position symmetrically opposite to the front side.
Same as Side 1
Print in the same position as the front side.
To Next Page
Loading...
