EasyManua.ls Logo

Fuji Xerox ApeosPort 450 I

Fuji Xerox ApeosPort 450 I
609 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 Problem Solving
492
Problem Solving
16
035-746
O [Cause] The fax network does not respond.
This may be caused by the following. Check them and
then send the fax again.
[Remedy] Is the telephone line correctly connected?
The person you are faxing to may not have a contract with
the fax network, or there may be some trouble with the fax
network.
Furthermore, when connecting the machine to the fax
network, enter two pauses after "161" and "162" then dial
the telephone number.
035-747
035-748
O [Cause] The dialing or transmission was interrupted by the Stop
button.
[Remedy] No operation is necessary.
035-749
O [Cause] Unable to communicate due to an incorrect phone
number.
[Remedy] Check the phone number, and try again.
035-750
O [Cause] The communication was interrupted by a power-off
operation or by the Reset button.
[Remedy] Turn the machine's power switch on to send the fax
again. If the machine is not improved by performing the
relevant remedy, contact our Customer Support Center.
035-751
035-752
O [Cause] The dialing or transmission was interrupted by the Stop
button.
[Remedy] No operation is necessary.
035-762
036-500
036-501
036-502
036-503
036-504
036-505
036-506
036-507
036-508
036-509
036-510
036-511
036-512
036-513
036-514
036-515
034-516
034-517
034-518
034-519
034-520
034-521
036-522
O Refer to 034-508.
Error Code
Category
Cause and Remedy
CPFSMO

Table of Contents

Related product manuals