Stapler Faults
527
Problem Solving
16
6 Remove the entire staple sheet
including the jammed staple.
Important • Be sure to remove the entire
staple sheet. Do not remove
the jammed staple only.
7 Pull down the front lever on the
staple cartridge until you hear it
click into place.
8 Hold the lever to insert the staple
cartridge in the machine until you
hear it click into place.
9 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate unless the front cover is
completely closed.
If the staples cannot be removed after carrying out the above procedures, contact our
Customer Support Center.
To Next Page
Loading...
Need help?
General
