Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

3.2.2 Before starting up 36
3.2.3 Installation and operation 36
3.2.4 Batteries 39
3.2.5 Working with optical disk drives (ODDs) and media 39
3.2.6 Laser information 41
3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 41
3.2.8 Transporting the server 43
3.2.9 Installing the server in the rack 44
3.2.10 Other important information 44
3.3 CE conformity 45
3.4 FCC Class A Compliance Statement 45
3.5 Environmental protection 46
4 Basic hardware procedures 49
4.1 Using diagnostic information 49
4.1.1 Proceeding 49
4.1.2 Locating the defective server 49
4.1.3 Determining the error class 50
4.1.4 Locating the defective component 50
4.2 Removing the front cover with lock 52
4.3 Shutting down the server 52
4.4 Disconnecting the power cord 53
4.4.1 Disconnecting the power cord (AC PSU) 53
4.4.2 Disconnecting the power cord (DC PSU) 54
4.5 Getting access to the component 56
4.5.1 Safety notes 56
4.5.2 Extending the server out of the rack 56
4.5.3 Removing the server from the rack 57
4.5.4 Removing the top covers 59
4.6 Reassembling 60
4.6.1 Safety notes 60
Content
Upgrade and Maintenance Manual RX2540 M6

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5