Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

System information has to be updated after one of the following tasks:
–
HDD/SSD backplane (2.5-inch, 3.5-inch, PCIe, EDSFF)
–
installing
–
removing
– changing (the technology, for example from SAS/SATA to PCIe)
–
Rear HDD/SSD cages
– installing
– removing
–
Specified expansion cards (for example EP5xxi)
– installing
– changing
Update your system information using the Chassis ID Prom tool. The tool and
more information are available to maintenance personnel from the Fujitsu web
pages:
https://partners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/
▶
Select your PRIMERGY system from the main area of the page.
▶
From the categories selection, choose Software & Tools Documentation.
▶
In the Tools area click Tools: Chassis-IDProm Tool to download the file
(tool-chassis-Idprom-Tool.zip).
For Japan:
Follow the instructions provided separately.
Basic software procedures
RX2540 M6 Upgrade and Maintenance Manual 111

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5