Installing the new hot-plug PSU
▶
Install the PSU, see "Installing a hot-plug PSU" on page 124
.
Concluding steps
▶
"Connecting the power cord" on page 65.
▶
Only when replacing a PSU in a non-redundant configuration: "Switching on
the server" on page 69.
▶
"Performing a fan test" on page 115.
A fan test does not need to be performed if the hot-plug PSU is
actively replaced. iRMC runs automatically.
Power supply unit (PSU)
132 Upgrade and Maintenance Manual RX2540 M6
To Next Page
Loading...
