▶
Carefully remove the expansion card from its slot (see arrow).
Installing the slot cover
CAUTION
▶
Always replace slot covers into unused PCI slot openings to comply
with applicable EMC regulations and satisfy cooling requirements.
Figure 159: Installing the slot cover
▶
Insert a slot cover into the unused PCI slot opening.
Concluding steps
▶
"Reassembling" on page
60
.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 69.
▶
If applicable, "Installing the front cover with lock" on page 69.
▶
If applicable, update the system information of your server using the Chassis
ID Prom Tool, see "Using the Chassis ID Prom Tool" on page 110.
Expansion cards and backup units
264 Upgrade and Maintenance Manual RX2540 M6
To Next Page
Loading...
