Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

▶
If applicable, "Configuring LAN teaming" on page 1
13.
▶
"Suspending BitLocker functionality" on page 87.
▶
"Shutting down the server" on page 52.
▶
"Disconnecting the power cord" on page 53.
▶
"Getting access to the component" on page 56.
▶
"Locating the defective component" on page 50.
▶
Remove the corresponding riser module, see "Removing a riser module" on
page 70.
Removing the defective expansion card
▶
Remove the expansion card, see "Removing the expansion card from a
riser module" on page 284.
▶
If the slot bracket on the defective expansion card is to be reused, remove it
from the expansion card, see "Removing slot brackets" on page 239.
Installing the new expansion card
▶
If applicable, install the slot bracket, see "Installing slot brackets" on
page 237.
▶
Install the expansion card, see "Installing the expansion card in a riser
module" on page 281.
Concluding steps
▶
Install the corresponding riser module, see "Installing a riser module" on
page 72.
▶
"Reassembling" on page 60.
▶
If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 69.
▶
If applicable, "Installing the front cover with lock" on page 69.
▶
"Enabling replaced components in the BIOS" on page 100.
Expansion cards and backup units
RX2540 M6 Upgrade and Maintenance Manual 287

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5