Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center.
For more information on configurations of Optane PMem modules
and DDR4 DIMMs, see "Basic information" on page 330.
▶
Only for Optane PMem modules:
Check if the Optane PMem firmware is released for your BIOS
version.
Preliminary steps
▶
"Suspending BitLocker functionality" on page 87
.
▶
If applicable, "Removing the front cover with lock" on page 52.
▶
"Shutting down the server" on page 52.
▶
"Disconnecting the power cord" on page 53.
▶
"Getting access to the component" on page 56.
▶
"Removing the air duct" on page 78.
Selecting the memory slot
▶
Choose the memory slot according to the configuration rules, see "Basic
information" on page 330.
Main memory
RX2540 M6 Upgrade and Maintenance Manual 337
To Next Page
Loading...
