134
Engineering, User & Panel Configuration
FormatFusion3TM
RGB
Touch the “RGB” button to enable the parameter controls. The initial menu is set to a default
condition, which Shows the Master adjustment parameters. This will give an adjustment of
Master Lift, Gain and Gamma. Each of these adjustments will alter all three elements of the RGB
signal at the Grass Valleye time.
When one of the master parameters is altered, notice that the RGB curve profile changes in the
graph situated center of the menu.
Touching one of the attachers allows a more accurate adjustment to the RGB components
where the:
RGB Lift - parameters adjust the images Black Level, working on Black or shadow areas.
RGB Gamma - parameters adjust the levels between dark/shadow and the mid tones, where
the mid tones become brighter or darker; depending on the adjustment made.
RGB Gain - parameters control the White level or highlights, where brighter colors become
brighter or darker; depending on the adjustment made.
RGB S Gain and S Center - the parameters adjust the gain mid tone levels of the S curve and
the center point levels of the s curve.
To Next Page
Loading...
