GRASS VALLEY MASTERPIECE User Manual

177
Masterpiece
User Manual
The IP input Flow Template, allows the user to set the Multicast IP address (this is user specific).
The Source IP is the IP address of the incoming source.
When the information is input into the IP Input Flow Template, set the “Multicast Increment” to
increment by “1”, the Template tool allows an address or port number to be incremented each
time the {Paste from Template} button is touched.
For example enter the Multicast IP address - 120.14.10.01, then setting the increment to 1, then
when the {Paste from Template} button is pressed, the Multicast IP address will increment by
1 automatically. This is handy and less time consuming if the user is setting up a lot of spigots.
This has to be done for each Flow for each Spigot.
These have to be setup for each spigot.
It is recommended “Video Standard” parameter is set to “Auto”, w h i c h a s s u g g e s t e d w i l l
automatically select the video standard for the selected spigot.
The “Link Status” window displays the incoming video standard.

GRASS VALLEY MASTERPIECE Specifications

General

Brand	GRASS VALLEY
Model	MASTERPIECE
Category	Switch
Language	English