238
Effects Dissolve and Squeeze Effects
Bgnd DVE and Mixer DVE
Touch the first memory file created (100) in the DMEM menu and then touch the {Load} button
(shown below). As the first DMEM loads, touch the next memory file (101) to select it ready for
loading. When DMEM 100 finishes loading, touch the {Load} button again for DMEM 101. Then
finally touch the {Record Macro} button again to stop the macro recording.
Touch the {Macro} button and the “Macro Edit” menu is displayed. The recorded DMEM load
actions can be seen in the “Macro Actions” table. You test the recorded macro by touching the
{Test Macro} button.
When satisfied with the macro, touch the {Save...} menu link button.
Select a free slot in the Macro Save table, give the macro a name using the “Name” attacher
and on-screen keyboard and then touch the {Save} button. In the Macro Save menu, touch the
{Assign...} menu link button.
To Next Page
Loading...
