345
Masterpiece
User Manual
The user can select a device by touching one of the Camera Control Buttons, making sure that
the correct parameter controls is selected for the type of device, i.e. Pan, Tilt and Zoom.
Pan, Tilt and Zoom - move the camera as described, as soon as the attachers is touched the
selected parameters can now be attached to the control surface joystick (if available).
Height - adjusts the height of the camera pedestal
X, Y and Focus - work in the Grass Valleye way as the parameters above and are selected by
touching the attachers, and selecting X, Y & Focus.
Command - makes the number button select that camera for controlling. Detach makes the
number button deselect that camera.
Default Shot Time - The default time entered for camera shot storage control.
Camera Status Menu Link Button
The menu displays the camera head connection status, when connected to either the
Masterpiece system or the Shotoku Robotic camera head control panel.
ID - this displays the number of Robotic Camera heads that are connected and can be
controlled,
Selected - this displays if the Robotic Camera heads are selected and active
Controller - this displays a unique number for the controlling device, for example, the Shotoku
Control panel could be Controller ID 1, and Masterpiece could be Controller ID 2 depending
which Masterpiece ID value is entered by the user.
Note: Each control button can have a number of commands and
attachments, so the cloning of camera control buttons is recommended.
To Next Page
Loading...
