346
Peripherals
Peripherals - User
Local - this indicates if the camera head is currently under local control.
Move Type - this shows the 'shot type' of the current move. This will only display something
during the shot recall.
Time To Shot - if a camera head has got a preset position setup in one of the Registers (shown
later), this is the time that the camera head would take to move into that preset position.
Settings Menu Link Button
ID - A unique ID set as the controlling device, when online this field will be greyed out.
The user can manually select which camera head they wish to use by touching one of the 32
available buttons.
Note: The camera head can only be selected if it is deselected on the
Shotoku controller.
To Next Page
Loading...
