375
Masterpiece
User Manual
Setup the Yamaha (this example 01V96i) Audio Mixer to communicate with the
KissBox
From the MIDI connectors on the back of the back of the KissBox, connect a MIDI cable from
the “MIDI IN” port on the KissBox from the “MIDI OUT” on the Yamaha mixer. Connect a MIDI
cable from the “MIDI OUT” port on the KissBox from the “MIDI IN” on the Yamaha mixer, (as
shown in the diagram on page 1).
Power up the Yamaha audio mixer, then using the LCD screen on the Yamaha mixer, navigate to
the “DISPLAY ACCESS - DIO/SETUP - MIDI HOST” menu and select “MIDI” for both the “Rx Port”
and the Tx PORT”.
Next, go to the “DISPLAY ACCESS - MIDI - SETUP” and set:
CHANNEL - Tx to 1 and Rx to 1
PARAMETER CHANGE - Tx to ON and Rx to ON
Fader Resolution: HIGH
All other options need to be set to OFF.
To Next Page
Loading...
