# Part
1 Compiler feed roller
2 Stack lever
3 Aligner roller
4 Motor (staple finisher aligner)
5 Front tamper
6 Sensor (staple finisher front tamper home)
7 Exit roller solenoid
8 Motor (staple finisher front tamper)
9 Sensor (staple finisher tamper paper present)
10 Motor (staple finisher rear tamper)
11 Lower exit roller
12 Sensor (staple finisher rear tamper home)
13 Stack lever solenoid
14 Motor (staple finisher transport)
Compiler section paper feed
After receiving the paper from the feed section, the compiler feed roller pushes the paper between the raised upper
exit roller and lower exit roller. The paper falls due to its weight, and the trailing edge lands on the compiler assembly.
The paper toggles the sensor (staple finisher tamper paper present).
4021, 7421
Appendix C: Theory of operation
637
To Next Page
Loading...
