Action Yes No
Step 8
a Make sure that the transport belt and gear are properly installed.
b Check the belt and gear for wear or damage, and replace if necessary.
See
“Booklet maker transport gear and belt removal” on page 481.
Does the problem remain?
Go to step 9. The problem is solved.
Step 9
a Make sure that the transport roller, transport idler rollers, and springs
are properly installed.
b Make sure that the rollers are free of dust or debris.
c Check the parts for wear or damage, and replace if necessary. See
“Booklet maker transport roller removal” on page 482 and “Booklet
maker transport idler rollers removal” on page 467.
Does the problem remain?
Go to step 10. The problem is solved.
Step 10
a Make sure that the decurl guide and decurl lever are properly installed.
b Check the guide and lever for wear or damage, and replace if
necessary. See
“Booklet maker decurl guide removal” on page 485
and
“Booklet maker decurl lever removal” on page 468.
Does the problem remain?
Go to step 11. The problem is solved.
Step 11
a Test the motor (booklet maker decurl).
Enter the Diagnostics menu, and then navigate to:
Motor Tests > Booklet Maker Motor Test >Paddle
b Check if the belts, gears, and rollers are properly moving.
Are they properly moving?
Go to step 14. Go to step 12.
Step 12
a Reseat the cable on the motor.
b Make sure that the motor is properly installed.
c Check the motor and cable for damage, and replace if necessary. See
“Motor (booklet maker paddle) removal” on page 476.
Does the problem remain?
Go to step 13. The problem is solved.
Step 13
a Make sure that the decurl gears are properly installed.
b Check the gears for wear or damage, and replace if necessary. See
“Booklet maker decurl gears removal” on page 483.
Does the problem remain?
Go to step 14. The problem is solved.
4021, 7421
Diagnostic information
77
To Next Page
Loading...
