Lucent Technologies FT-2000 OC-48 User Manual

NTP-002: Operation 365-575-102
Page4of4 Issue8.0,July2002
FT-2000 OC-48 Ligthwave System
Software Release Description
Release
7.2.10-ADR
Comcode 109191668
NOTE:
The feature "Sync Messaging" has two
states. The default state is Enabled.The
alternate state is Disabled. The B2 optical
transmitters do not (for R7.2) support the
Sync Messaging feature. Therefore, if a
node contains B2 transmitters and is being
upgraded with 7.2 generic software--an
alarm will be raised for each B2 transmitter.
This Major Alarm is defined as "Sync Mode
Equipment Conflict". Refer to TAP-102 for
details on how to clear this alarm.
2. Refer to and perform the appropriate software
download procedure (initial installation/
upgrade/change) per the software release
description for your particular release.
—

Lucent Technologies FT-2000 OC-48 Specifications

General

Brand	Lucent Technologies
Model	FT-2000 OC-48
Category	Network Hardware
Language	English