Lucent Technologies FT-2000 OC-48 - Example of 1-Way and 1-Way-DRI Cross-Connections in Video Applications

Administration and Provisioning
Issue 8.0 July 2002
8-67
Entering 1-Way-DRI Cross-Connections in Video Applications 8
Figure 8-21 shows a 1-way circuit that has been established on a 2-fiber
bidirectional ring that is part of a 1-way video application. The 2-fiber bidirectional
ring has two nodes with 1-way-DRI cross-connections (node 0 and node 2) and
each node has a 1-way drop cross-connection from line 1W. Nodes 1, 3, and 4
also have a 1-way through cross-connection.
Figure 8-21. Example of 1-Way and 1-Way-DRI Cross-Connections in
Video Applications
The CONFIGURATION-Enter-Crossconnection-STS3 input is used to enter
1-way and 1-way-DRI cross-connections at the nodes. (Refer to "Entering 1-Way
and 2-Way Cross-Connections" in this section for examples showing bridge and
2-way cross-connections.)
Node 0
1W 1E
1A 4B 8B
16
1
OC-48
5A
16
1
6
Node 1
1W 1E
1A 8B
16
1
16
1
66
Node 4
1E 1W
1A 8B
16
1
OC-48
16
1
Node 3
1E 1W
1A 8B
16
1
16
1
6
OC-48OC-48
6
6
OC-48
Node 2
1W 1E
1A 8B
16
1
16
1
666
4A 4A 4B4A
6
4A
4A