Craft Interface Terminal Usage
Issue 8.0 July 2002
11-71
Example 18 - CONFIGURATION-Retrieve-Low Speed 11
The above report shows the protection switching priority of each low speed slot
that is addressed.
The fields of the report are described below:
Slot
Address
- Shows the line and slot address of the low speed interface.
PS
Priority
- Shows the provisioned protection switching priority, either
"HIGH" or "LOW," for an electrical low speed slot.
Lucent Technologies-FT-2000 96-07-19 23:15:15 EST
M Retrieve-Low Speed:All: COMPLD
/* Low Speed Slot Report
=============================================================
Slot PS
Address Priority
=============================================================
ls-1-1a HIGH
ls-1-1b HIGH
ls-1-2a low
ls-1-2b low
..
..
..
ls-1-8a HIGH
ls-1-8b HIGH
*/
;
To Next Page
Loading...
Need help?
General