Lucent Technologies FT-2000 OC-48 - Examples of Reports [Generated by Various Inputs (Commands)]; Example 1 - SECURITY-Retrieve-Active-User

Craft Interface Terminal Usage
Issue 8.0 July 2002
11-39
Examples of Reports [Generated by
Various Inputs (Commands)] 11
Example 1 - SECURITY-Retrieve-Active-User 11
(Releases 5 and Later)
The preceding report shows the current CIT and TL1 port provisioning and who is
currently logged in on each port.
Delta-1 97-06-15 23:15:15 EST
M Retrieve-Active-User:All: COMPLD
/* Active User Report
=====================================================================
Access Port Type/ TL1 Calling Active
Port Channel OS Type Address/GNE TID User
=====================================================================
dce cit -
dte tl1 -
---------------------------------------------------------------------
dcc vc-0 cit luc02
dcc vc-1 memry-admin luc01
dcc vc-2 cmd-resp luc03
:
dcc vc-8 - -
---------------------------------------------------------------------
x25 pvc-1 maintenance NMA01
x25 pvc-2 other TMAS
--------------------------------------------------------------------
x25 svc-1 other 1234 SNC2000
:
x25 svc-6 - - -
*/
;
Information below is for Release 5.0
=====================================================================
Access Port TL1 Active
Port Channel Type Calling Address User
=====================================================================