Craft Interface Terminal Usage
Issue 8.0 July 2002
11-117
Example 37 - PERFORMANCE-Retrieve-PM Threshold-Optics 11
Releases 7 and Later (Use the PERFORMANCE category.)
Address - Shows the specific optical line.
Bin - Shows the quarter-hour (QH) and day bins.
TX-Pwr - Shows if the automatic reporting of TCAs is enabled or
disabled for laser transmitted power.
Rcv-Pwr - Shows if the automatic reporting of TCAs is enabled or
disabled for laser received power.
LBC - Shows if the automatic reporting of TCAs is enable or
disabled for laser bias current.
Delta-1 91-07-15 23:15:15 EST
M Retrieve-PM Threshold-Optics:OC48:All: COMPLD
/* OC-48 Optics TCA Autonomous Reporting Status Report
=====================================================================
TCA Report TCA Report TCA Report
Address Bin TX-Pwr Rcv-Pwr LBC
=====================================================================
line-1e QH Enable Enable Enable
Day Disable Disable Disable
line-1w QH Enable Enable Enable
Day Disable Disable Disable
*/
To Next Page
Loading...
Need help?
General