Lucent Technologies FT-2000 OC-48 - Example 24 - CONFIGURATION-Retrieve-OC48

Craft Interface Terminal Usage
Issue 8.0 July 2002
11-85
Example 24 - CONFIGURATION-Retrieve-OC48 11
Releases 7.2 and Later
The above report shows provisioned information for each addressed high-speed
line at an FT-2000 add/drop-rings terminal.
Line
Address
- Shows the OC-48 line(s) selected for the report.
Line Code - Shows the non-return-to-zero (nrz) line code.
Signal
Degrade
Threshold
- Shows the provisioned threshold value. This value
determines when a signal degrade condition will be
declared. The value is the line parity error rate for the
specified line(s); for example, -5 is error rate 10
-5
.
Sync
Messaging
- Shows the provisioned sync messaging state in the
“from OC48” direction.
NOTE:
B5 optics are required for this feature/option.
DALLAS01 01-08-15 09:00:22
M Retrieve-OC48:All: COMPLD
/* OC-48 Line Provisioning Report
=====================================================================
Line Line Signal Degrade Sync
Address Code Threshold Messages
=====================================================================
line-1e nrz -6 disabled
line-1w nrz -6 disabled
*/
;