Lucent Technologies FT-2000 OC-48 - Example 5 - CONFIGURATION-Retrieve-Attribute-Control

Craft Interface Terminal Usage
Issue 8.0 July 2002
11-45
Example 5 - CONFIGURATION-Retrieve-Attribute-Control 11
The above report shows the descriptive name associated with the user-settable
miscellaneous discrete control output points. These output points are wired to
control/identify the output control points at a remote site.
The fields of the report are described below:
Address - Shows number selected (up to four) output points for the
report.
Description - Shows the name (26-character string) associated with the
output points, such as "start pump," "start generator," etc.
Lucent Technologies-FT-2000 96-07-19 23:15:15 EST
M Retrieve-Attribute-Control:All: COMPLD
/* Control Point Provisioning Report
=============================================================
Address Description
=============================================================
cont-1 start generator
cont-2 stop pump
cont-3 control 3
cont-4 control 4
*/
;