Lucent Technologies FT-2000 OC-48 User Manual

Tab le of Conten ts
Issue 8.0 July 2002 6-i
6
Operations Interfaces
Overview 6-1
Craft Interface Terminal 6-1
■ General 6-1
■ PC with FT-2000 CIT-PC Software 6-2
■ PC with CPro-2000 Software 6-5
■ ASCII-Based Terminal 6-7
■ Local Access Through the CIT (DCE) Port 6-8
■ Dial-Up Access Using a Modem Through the CIT
(DTE) Port 6-8
■ Remote Access Using the OC-48 Data
Communications Channel (DCC) 6-10
■ Remote Access Using the OC-48 Section Orderwire 6-10
■ Remote Access Using the OC-3/OC-12 Data
Communications Channel (DCC) 6-12
User Panel 6-13
Filter Panel 6-17
Office Alarms Interface 6-19
Parallel Telemetry Interface 6-20
User-Settable Miscellaneous Discrete Interface 6-20
Serial Telemetry Interface 6-22
Message-Based Operations System Interface 6-23
Orderwire Interface 6-30

Lucent Technologies FT-2000 OC-48 Specifications

General

Brand	Lucent Technologies
Model	FT-2000 OC-48
Category	Network Hardware
Language	English