Lucent Technologies FT-2000 OC-48 - Craft Interface Terminal; Personal Computer Requirements

Technical Specifications
Issue 8.0 July 2002
10-39
Craft Interface Terminal 10
Personal Computer Requirements 10
In Release 5.0.2 and later releases, a PC must meet the following minimum
requirements to be loaded with FT-2000 CIT-PC software and used as a CIT:
■ 386SX IBM
*
compatible computer (desktop or lap top) (25 MHz clock or
greater)
■ Floppy Disk drive — one 1.44 Megabyte (3.5 inch)
■ Hard disk with approximately 5 Megabytes of free space
■ 4 Megabytes RAM
†
■ MS-DOS
‡
computer program, version 5.0 or later
■ Serial port (EIA-232-D) — configured as COM1, COM2, COM3, or COM4
■ Parallel port — configured as LPT1
■ VGA color monitor.
* Registered trademark of International Business Machine Corporation.
† No memory resident programs running in the background. 565 kilobytes of conventional
memory is also required. In Release 7 and later releases, 2 megabytes of extended
extended memory is also required. If less than 565 kilobytes of free conventional memory
is available, a memory manager (for example, HIMEM.SYS with
MS-DOS 5.0 and later) is
required to increase the free conventional memory.
‡ Registered trademark of Microsoft Corporation.