Craft Interface Terminal Usage
Issue 8.0 July 2002
11-131
Example 42 - CONFIGURATION-Retrieve-Protection-Low Speed 11
Releases 4 and Later (Use the CONFIGURATION category.)
The report shows the provisioned low-speed protection switching information of
the FT-2000 network element.
Wait To Restore - Shows the time (up to 12 minutes after a trouble clears)
before breaking the automatic low-speed switch. A
value of zero minutes will disable this parameter.
Delta-1 93-01-19 23:15:15 EST
M Retrieve-Protection-Low Speed: COMPLD
/* Low Speed Protection Switching Provisioning Report
=============================================================
Parameter Value
=============================================================
Wait To Restore 3 minutes
*/
;
To Next Page
Loading...
Need help?
General