TAP-102: Trouble Clearing 365-575-102
Page4of8 Issue8.0,July2002
Table A - Trouble Conditions (Contd)
Description Go To TAP
incoming OC12 LOS TAP-110
incoming (from OC-48) DS3 AIS TAP-109
incoming (from OC-48) DS3 LOF TAP-122
incoming (from OC48) path AIS TAP-110
incoming (from OC48) STS LOP TAP-174
incoming (from STSX1) EC1 LOF TAP-110
incoming (from STSX1) EC1 LOP TAP-110
incoming (from STSX1) EC1 LOS TAP-110
incoming (from STSX1) EC1 SD TAP-110
incoming (from STSX1) line AIS TAP-110
incoming OC-48 AIS TAP-110
incoming OC-48 APS byte fail TAP-132
incoming OC-48 APS default byte TAP-168
incoming OC48 B1 parity error TAP-147
incoming OC-48 invalid F byte TAP-145
incoming OC-48 line RFI/yellow TAP-121
incoming OC-48 LOF TAP-110
incoming OC-48 LOS TAP-110
incoming OC-48 LOS/LOF TAP-147
incoming OC-48 SD TAP-110
incoming OC-48 SF TAP-110
incoming sync ref failure TAP-110
inhibit alarms-office alarms TAP-114
inhibit alarms-parallel telem TAP-114
inhibit alarms-X.25 TAP-114
laser bias current-out-of-range TAP-135
Continued on next page
To Next Page
Loading...
Need help?
General