365-575-102 TroubleClearing:
Issue 8.0, July 2002 Page 1 of 2
TAP-122
Address ‘Path AIS’, ‘Path Yellow’,
‘Incoming (from OC-48) DS3 LOF’,
‘Inc(from STSX) Line RFI/Yellow’,
‘Inc(from OC48) Path RFI/Yellow’, and
‘Incoming OC3 Line RFI/Yellow’
‘Incoming OC12 Line RFI/Yellow’
1. Consult and follow the local maintenance procedures regarding how to
address the low-speed or the high-speed condition(s) shown below. The con-
dition (trouble) is not in the local FT-2000 network element.
path AIS
path yellow
incoming (from OC3) STS LOP
incoming (from OC12) STS LOP
incoming (from OC-48) DS3 LOF
inc(from STSX) line RFI/yellow
inc(from OC48) path RFI/yellow
incoming OC3 line RFI/yellow
incoming OC12 line RFI/yellow
incoming OC12 LOF
incoming OC12 SF
incoming OC12 SD
incoming OC12 AIS
incoming OC12 APS byte fail
2. Obtain an Active Alarms and Status Report and determine if other conditions
are to be cleared.
If YES, then find the topmost other condition in Table A of TAP-102 and
go to the referenced TAP.
If NO, then STOP! YOU HAVE COMPLETED THIS PROCEDURE.
To Next Page
Loading...
Need help?
General