365-575-102 TroubleClearing:
Issue 8.0, July 2002 Page 1 of 2
TAP-147
Address Condition at Remote Repeater Bay/Shelf
Overview: This procedure is used to address a condition at a remote FT-2000
Repeater Bay/Shelf in response to one of these indicated conditions:
• Incoming OC48 B1 parity erroroptical parameter out-of-range
• Incoming OC48 invalid F byterepeater bay environment input
• Incoming OC48 LOS/LOFrepeater bay equipment failure
NOTE:
The condition to be cleared is at a remote FT-2000 Repeater Bay/Shelf.
1. Referring to the Active Alarms and Status Report on the CIT screen, note and
record the Source Address for the condition that sent you to this procedure
(the topmost condition in the report).
2. Issue a Trouble Report to the FT-2000 Repeater Bay/Shelf location with the
indicated Source Address. The Trouble Report should include the text from
the Description field of the report.
3. STOP! YOU HAVE COMPLETED THIS PROCEDURE.
To Next Page
Loading...
Need help?
General