Lucent Technologies FT-2000 OC-48 - Page 28

Tables
xxviii Issue 8.0 July 2002
9-10 Synchronization Hardware Protection Switching Priorities 9-65
9-11 Synchronization Reference Protection Switching Priorities 9-68
9-12 Synchronization Mode Protection Switching Priorities 9-71
9-13 Performance-Monitoring Parameters 9-82
10-1 OC-48 Loss Budget Specifications 10-5
10-2 OC-48 Loss Budget Specifications for 739E/G[1-8] OC48
TRMTR Circuit Packs 10-6
10-3 OC-48 Loss Budget Specifications for 739E/G[9-16] OC48
TRMTR Circuit Packs 10-7
10-4 OC-48 Loss Budget Specifications for 739H[1-8] OC48
TRMTR Circuit Packs 10-8
10-5 OC-48 Loss Budget Specifications for 739H[9-16] OC48
TRMTR Circuit Packs 10-9
10-6 OC-48 Loss Budget Specifications for 839B5 and 839E5
OC48 RCVR Circuit Packs 10-9
10-7 FT-2000 OC-48 Lightwave System and FT-Lightwave Booster
Amplifier Loss Budgets 10-11
10-8 FT-2000 OC-48 Lightwave System and Wavelength Division
Multiplexing Systems Loss Budgets 10-12
10-9 FT-2000 OC-48 Lightwave System with Wavelength Division
Multiplexing Systems and FT-LBA Loss Budgets 10-13
10-10 Transmission Distances without Optical Amplifiers 10-14
10-11 Transmission Distances with the FT-Lightwave Booster
Amplifier 10-15
10-12 Transmission Distances with Wavelength Division
Multiplexing and the FT-LBA 10-16
10-13 OC-3 Line Loss Budget Specifications (Note) 10-21
10-14 IS-3 Line Loss Budget Specifications 10-24
10-15 OC-12 Line Loss Budget Specifications 10-27
10-16 Maximum Distances 10-28
10-17 Electrical Line Buildout Specifications 10-30
10-20 TL1/X.25 Interface — X.25 Packet Layer Parameters 10-45
10-21 TL1/X.25 Interface — LAPB Link Layer Parameters 10-45
10-22 TL1/X.25 Interface — EIA-232D Pin Connections 10-46
11-1 CPro-2000 Cross-Reference Procedures 11-2
11-2 Release 7 Inputs (Commands) Menu for FT-2000
Add/Drop-Rings Terminal 11-8
11-3 Release 6 Inputs (Commands) Menu for FT-2000
Add/Drop-Rings Terminal 11-12