Administration and Provisioning
8-90 Issue 8.0 July 2002
■ CONFIGURATION-Delete-Assignment-DCC: This input deletes an
OC-12 DCC assignment to a low-speed interface quad slot or pair of
low-speed interface quad slots. Deleting an OC-12 DCC assignment
disables DCC communications on the supporting OC-12 line. An OC-12
DCC assignment is deleted by specifying a low-speed interface command
slot and a DCC channel.
An input deleting an OC-12 DCC assignment will be denied if one of the
following conditions is present:
— TheTOHCTLslotisintheAUTOstate.
— The TOHCTL circuit pack has been removed.
— The TOHCTL circuit pack has failed.
An input deleting an OC-12 DCC assignment may be denied if an
automatic turnup test is running. During that part of the test cycle when the
DCC connections between the OC-12 (1.3 STD) and TOHCTL circuit
packs are being verified, an input deleting an OC-12 DCC assignment will
be denied.
If the DCC assignment specified by the input does not exist, the input will
be completed and no DCC assignment is deleted.
■ CONFIGURATION-Retrieve-Assignment-DCC: This input generates a
report showing all the assigned (both to OC-3 and to OC-12). For more
information about the DCC Assignment Report, refer to Volume I,
Section 11, "Craft Interface Terminal Usage.”
To Next Page
Loading...
Need help?
General