Lucent Technologies FT-2000 OC-48 User Manual

System Introduction
Issue 8.0 July 2002
1-7
For more information about the FT-2000 OC-48 Lightwave System releases and
their availability, refer to 365-575-100,
FT-2000 OC-48 Lightwave System,
Applications, Planning, and Ordering Guide
.
- Two-Way STS-3 Cross-Connections XXXXXXXX
- Limited STS-1 Cross-Connections XXXXX
- Revertive DRI Protection Switching on STS
(low speed) Links
XX
- STS-1 Cross-Connections Across an OC-
48 Signal
XXX
- STS-3 Non-Preemptible Protection Access
(NPPA) (B5 optics)
XX
- STS-1 Non-Preemptible Protection Access
(NPPA)
X
-Security XXXXXXXXX
-RemoteSoftwareDownloads XXXXX
Subnetwork Size
- 50 NEs (Single Level 1 area only) X
Maintenance
- Performance Monitoring for Incoming Low
Speed Signals
XXXXXXX
- Expanded Performance Monitoring of up to
32 Network/Subnetwork Elements
XX
- F and M Bit, Adjusted DS3 Performance
Monitoring
XXXXX
-ThresholdCrossingAlertReporting XXXXXXX
- Enhanced TL1 Commands and Reports XXXXXX
-ASCII-BasedTerminalInterface XXXXXX
-CircuitProvisioningAudits XXXXXX
-TL1MessageEnhancements XXXXX
-OIviatheDCCforOC-30x1and1+1links XXXXX
- OI via the DCC for OC-12 0x1 links XX
- OI via the DCC for OC-12 1+1 links X
- Orderwire at Repeaters XXXX
- Larger TL1 Command/Message Set X X X
- Remote Alarms (NE-to-NE Status)
reporting
X
- Synchronization Messaging XX
- Line Timed Mode Synchronization With
Auto Reconfiguration
X
- Switch on Line Signal Degrade for DRI X
Table 1-1. Major Features of Product Releases 1 Through 7.2 (Contd)
Available in Product Release:
MajorFeatures 1234.04.15677.17.2

Lucent Technologies FT-2000 OC-48 Specifications

General

Brand	Lucent Technologies
Model	FT-2000 OC-48
Category	Network Hardware
Language	English