Craft Interface Terminal Usage
Issue 8.0 July 2002
11-53
The fields of the report are described below:
Source AID - The STS-1 Tributary or Port Address identifier.
Destination
AID
- The STS-1 Tributary or Port Address identifier.
Type - The type of connection.
Source TID - The signal entry source destination (LOCA).
Destination
TID
- The signal exit destination (LOCZ).
Primary State - The status of 1WAYDRI and 1+1 protected OC-3 interface
cross-connections. The values are ACT (active) or STBY
(standby).
Invalid Flag - An asterisk displays (first character of the Source/Destination
TID) if a provisioned cross-connection does not exist in the ring.
AUDIT
parameter Flag
- A "+" displays (last character of the Type field) if a provisioned
cross-connection has its AUDIT parameter set to "No." If the
AUDIT parameter is set to "Yes," the last character is blank.
To Next Page
Loading...
Need help?
General