Craft Interface Terminal Usage
11-96 Issue 8.0 July 2002
Release 2 (Use the PERFORMANCE category.)
The above report shows the current performance-monitoring data for all OC-48
lines. When a greater than sign (">") is displayed, it means the violations are
greater than the maximum value for the parameter. When a question mark ("?") is
displayed, it means corrupted data or an incomplete time cycle for that parameter.
This report is not available at the repeater site.
The fields of the report are described below:
Address - Shows the specified OC-48 line.
Start
Time
- Shows the time by month, day, hour, and minutes.
B2 CV - Shows the number of code violations reported in B2 during
the specified time.
B2 ES - Shows the number of errored seconds reported in B2 during
the specified time.
B2 SES - Shows the number of severely errored seconds reported in
B2 during the specified time.
B2 UAS - Shows the number of unavailable seconds reported in B2
during the specified time.
PSC - Shows the number of protection switching counts during the
specified time.
TERMB 92-07-15 13:15:15 EST
M Retrieve-Performance Monitoring-Line:1: COMPLD
/* STS-48 Line Performance Monitoring Status Report
Last initialized: quarter hour registers at 92-07-15 13:15:00
day registers at 92-07-15 00:00:00
===================================================================
Address Start B2 B2 B2 B2 PSC
Time CV ES SES UAS
===================================================================
line-1 Today 4? 2? 0? 820 1
07-14 1735 5 3 0 0
-------------------------------------------------------------------
13:15 1 1 0 0 0
09:00 3 1 0 0 0
08:45 0? 0? 0? 820 1
*/
;
To Next Page
Loading...
Need help?
General