Craft Interface Terminal Usage
Issue 8.0 July 2002
11-99
Release 2 (Use the PERFORMANCE category.)
The above report shows the current performance-monitoring data for the
transmitter and receiver optics for all lines at an FT-2000 end terminal. This report
is not available at the repeater site.
Address - Shows the address of the transmitter or receiver in the
FT-2000 end terminal.
Start Time - Shows the time in hours and minutes for today only, or the
month and day are shown.
Transmit
Power
- Shows if the transmit power is within the specifications.
Receive
Power
- Shows if the receive power is within the specifications.
Laser bias
Current
- Shows if the laser bias current is within the specifications.
TERMB 92-07-15 09:15:15 EST
M Retrieve-Performance Monitoring-Optics:All: COMPLD
/* Optics Performance Monitoring Status Report
Last initialized: quarter hour registers at 92-07-15 09:15:00
day registers at 92-07-15 00:00:00
====================================================================
Address Start Transmit Receive Laser bias
Time Power Power Current
====================================================================
line-1 Today in range in range in range
--------------------------------------------------------------------
09:15 in range in range in range
====================================================================
line-p Today in range in range in range
--------------------------------------------------------------------
09:15 in range in range in range
*/
;
To Next Page
Loading...