Craft Interface Terminal Usage
Issue 8.0 July 2002
11-101
Release 3
The above report shows the current section performance-monitoring data for an
OC-48 line section. When a greater than sign (">") is displayed, it means the
violations are greater than the maximum value for the parameter. When a
question mark ("?") is displayed, it means corrupted data or an incomplete time
cycle for that parameter. This report is not available at the repeater site.
Address - Shows the line containing the section.
Start
Time
- Shows the time in hours and minutes (quarter-hour
increments) that data collection started. But if month and day
are shown, the data is for yesterday.
B1 CV - Shows the number of code violations reported in B1 during the
specified time.
B1 ES - Shows the number of errored seconds reported in B1 during
the specified time.
B1 SES - Shows the number of severely errored seconds reported in B1
during the specified time.
SEFS - Shows the number of severely errored frame seconds reported
for the specified section during the specified time.
Lucent Technologies-FT-2000 91607-15 13:15:15 EST
M Retrieve-Performance Monitoring-Section:1E: COMPLD
/* STS-48 Section Performance Monitoring Status Report
Last initialized: quarter hour registers at 91-07-15 13:15:00
day registers at 91-07-15 00:00:00
===============================================================
Address Start B1 B1 B1 SEFS
Time CV ES SES
===============================================================
line-1e Today 224831 902 403 0
07-14 393 5 0 0
---------------------------------------------------------------
13:15 0 0 0 0
09:00 1 1 0 0
08:45 3 1 0 0
08:15 0 0 0 0
08:00 224000> 900 403 0
*/
;
To Next Page
Loading...