Craft Interface Terminal Usage
11-124 Issue 8.0 July 2002
Releases 4, 5, and 6 (User the PERFORMANCE category.)
The report shows the current performance-monitoring threshold crossing alert
(TCA) values for the STS-1 path. This report is not available at the repeater site.
The fields of the report are described below:
Address - Shows the specific OC-48 line, STS-3 tributary, and STS-1
tributary for the STS-1 path.
Bin - Shows the quarter-hour (QH) and the day bins.
TCA
Report
- Shows if the automatic reporting of TCAs is enabled or
disabled.
BER - Shows the provisioned bit error rate for the QH and day bins
that will cause a TCA.
CV-P/F - Shows the provisioned number of code violations for the QH
and day bins that will cause a TCA.
ES-P/F - Shows the provisioned number of errored seconds for the QH
and day bins that will cause a TCA.
SES-P/F - Shows the provisioned number of severely errored seconds
for the QH and day bins that will cause a TCA.
UAS-P/F - Shows the provisioned number of unavailable seconds for
the QH and day bins that will cause a TCA.
/* STS-1 Path Performance Monitoring Threshold Value Report
===========================================================================
TCA -------- STS-1 Path (B3)/FEBE --------
Address Bin Report BER CV-P/F ES-P/F SES-P/F UAS-P/F
===========================================================================
sts1-1e-1-1 QH Enable -9 1000 25 10 10
Day Enable -9 1000 250 10 10
sts1-1e-1-2 QH Enable -9 1000 25 10 10
Day Enable -9 1000 250 10 10
sts1-1e-1-3 QH Enable -9 1000 25 10 10
Day Enable -9 1000 250 10 10
*/
:
Information below is for Release 4.0 and Release 4.1
/* STS-1 Path Performance Monitoring Threshold Value Report
===========================================================================
TCA -------- STS-1 Path (B3)/FEBE --------
Address Bin Report BER CV ES SES UAS
===========================================================================
To Next Page
Loading...
Need help?
General